CS41H CS11h Free ball float steam trap
CS41H/CS11H Free Float / Auto Horizontal free float steam trap valve
Vertical free float steam trap
free ball float steam trap Pressure Rating:1.6- 4.0Mpa Size:DN15-
200 Material:WCB.F304. F316.etc
Free ball float steam trap with built-in X-element type automatic
air vent, for use on process equipment.Discharge 600-700kg per hour
Free ball float steam traps are used in oil and gas, pipeline,
petrochemical, paper, utility, food, industries. Ideal for steam
main, steam heating system and condensate recovery system.
Free ball float steam traps prevent the steam put effectively
discharge sweat quickly. Especially suit for technical process that
requires fast heating speed, controls heating temperature strictly,
no pile-up sweat in heater assembly.
1. Start up, the valve air vent opens wide to continuously
discharge initial air.
2. As condensate comes into the traps, the float rises to allow
condensate to be discharged from valve seat.
3. Hot condensate( up to steam temperature) comes into the trap
heated Bimetal_element to close valve air vent, before steam
reaches the trap but condensate coming into the trap continues to
be discharge through valves seat
4. When condensate flow to the trap stops, the float closes valve
port( valve seat)which is, in addition always sealed below the
water level., prevent any steam leakage.
1. No concentrated wearing, long duration;
2. Good property of sealing, low steam leakage, notable
3. Set with adevice of air exhaust, able to quickly start and
continuously drain condensatedwater;
4. High rate of backing presssure, low degree of undercooling,
helpful to utilize the condensated waer by recovering;
5. No noise, easy to repair, good interchangeability.
1.5 times the design pressure
Austenitic stainless steel